1 off Zetta open bid auction

Hey Guys,

 With this Zetta we wanted to up the game a bit increasing the complexity of the build and the difficulty of fit and finish, while still keeping the design subtle and refined. Somewhat ;)

The handle scales have been made of a tight pattern Timascus 

with inlays of blackened Zirconium. 

 We decided to take the concept a little further by adding a peekaboo inlay of niobium into the back of each  scale, these inlays are only visible from the back of the handle. The Niobium is anodized a very vibrant blue to contrast with the Timascus. 

The Zetta features an asymmetrical blade with a duplex grind on the right side and a dagger grind on the left.

We will sell this knife via open bid auction. To place a bid please email Lucas at brnlylotto@gmail.com 

Also if you would like to send your maximum bid, I am happy to auto increase in $100.00 increments until you have won or been out bid. This may be easier for some depending on location.

I will post occasional updates in a few different places.  You can check in the comments section of this post, my forum on the USN as well as the Facebook pages for both Jens and myself.
This should give everyone a way to keep track of the progress.


The auction will run until Wednesday July 31st at 8.00 PM EST. 

To avoid any last minute sniping the auction will run 5 mins after the last bid. 

We will cover the cost of shipping worldwide for the winning bidder.

Basic Specs:

Oal- 9.9

Blade- 3.9

Thickness- 5/32

Steel- Takefu, Super gold 2

Scales- Timascus

Inlays front- Zirconium

Inlays back – Niobium

This auction will start with no minimum bid.

Whether you are bidding or not, thank you for following the progress of this most recent build.
Your support is greatly appreciated.

 Have fun and good luck!

 Lucas and Jens

Anso/Brnly Zetta collaboration Lottery.

Alright guys,
For those of you that haven't seen it Jens and I have just finished our most recent collaboration, The "Zetta"
 For this one I flew back to Denmark to work in the Anso shop for the duration of the build.
We got pretty ambitious with this and it tested us thoroughly,  after some long nights we finished in time and I was on a plane the next morning. 
 Finally back home and Jens has sent me the finished photography so I'm ready to get this thing started.

For this project we each had a few concepts that we wanted to try, one that we shared was the desire to do a high end all metal folder. We also decided that we wanted to work in some color with out it being overpowering, and to try a new blade steel.
The construction method we chose gave us a number of surfaces and materials to work with while also pushing us to work through problems that we hadn't come across before. 

This is what collaborations are really about for me, pushing yourself, sharing techniques and problem solving.

The result this time, is the Zetta.

Thanks for your support, we hope you enjoy the knives :)

Lucas 


 Here we go.. :)

Please read carefully, running lotteries via email can be a bit tricky.


Zetta Lottery.

To enter,
 Send an email to brnlylotto@gmail.com with the number of the knife that you are interested in posted in the subject line.

Please include your shipping address and phone number in the email.

You may enter once for each knife that you would like.
E.g. If you want 1 and 3 you would send an email for each.

This will help ensure that if you are drawn its for the version you actually want.

• Sign up will run from now until 10:00 am MST Sunday the 28th
• After sign up is closed I will draw names and email the winners
• you will have two hours from the time I contact you to reply and confirm payment, after which another name will be drawn.

Price- $1500.00 + $30.00 shipping

This run is only 10 pieces 2 of each material.

Basic Specs:

Oal- 9.9

Blade- 3.9

Thickness- 5/32

Steel- Takefu, Super gold 2 

Scales- Titanium

Inlays- Assorted

#1  Bronze

#2 Niobium

#3 Timascus

#4 Zirconium

#5 Mokume

Burnley/ Krein Straight razor collaboration lottery

Hey Guys,
 Just finished up the most recent project with Tom Krein.
We decided to build a small run of razors while he was in town last week.
This is a project I've been wanting to do for quite a while and I'm stoked with the results.

The blades on these are 01 tool steel with an antiqued finish, closed length is 6.5 open is just a hair (pun intended) over 10 inches, these boys are big and mean.

I'm going to try something new for a lottery this time around.

To enter, send an email to brnlylotto@gmail.com with your full name, phone number and shipping address. 

We have 3 available and Payment will be due upon confirmation.

I'll keep entry open from now until 5:00 pm eastern time Thursday the 4th, random number generator will be used to pick the winners.
1 entry per person, honor system, if I see multiples I'll drop all related entry's. 
Keep it classy.

I'll email the winners as soon as I draw, and you will have 2 hours to confirm.

These will be first drawn first choice until they're gone.

Thanks for your support and good luck. :)

Lucas


#1 Heat colored Titanium Frame with brass and stainless fittings.
Price $700.00 + $15.00 shipping in conus

#2 Woodgrain Copper Frame with Stainless fittings.
Price $750.00 + $15.00 shipping in conus

#3 Zirconium frame with brass and stainless fittings
Price $800.00 + $15.00 shipping in conus

Kwaiken Classics Available

Hey Guys, 
Back from blade and hustling on orders, so far the year has been crazy and with shows and collabs every couple of months it doesnt look like its going to lighten up.

Havent posted any of these for a while so I got a few Kwaiks ready to roll.
As always these will go to the first people to respond with an I'll take it email burnleyknives@gmail.com and payment will be due upon confirmation.

Thanks :)

Lucas 

Update- These are gone guys thank you for the support. :)

 1. Cpm154, acid wash blade, black sharkskin under wrap, Bamboo graphic sheath.
     Price- $250.00 +$10.00 shipping in conus SOLD

2. Cpm154, Viral etch blade, Green Rayskin under wrap, dragonfly graphic sheath
    Price-$265.00 + $10.00 shipping in conus SOLD

  3. Cpm154, Viral etch blade, Bling Ray under wrap, dragonfly graphic sheath.
       Price-$265.00 + $10.00 shipping in conus SOLD

Burnley 2013 blade show schedule

Hey Guys,
Changing things up a bit this year. Here's my basic schedule for the show. If there are any changes or additions, I'll post in this thread.
Looking forward to seeing you guys there.   :)

Lucas.

Table 19F

Friday 5/31

7am - People wearing exhibitors badges admitted.

12pm - Show opens for people with VIP and Retailer passes and early bird admission.

2pm - Show opens to the public.

• Fixed blades and Cypops will be sold first come, first served.
• Burnley Brawler badge pick up.
• Preview of open bid and lottery knives.

7pm - Show closes.

Saturday 6/1

8am - People wearing exhibitors badges admitted.

9am - Show opens to public.

• Beep Beep lottery sign up to run throughout the morning; all knives will be drawn by 12pm. (For those of you who have not tried this type of lottery: Details will be posted soon.)
• Open bid knife will close after the Beep Beep lotteries at 12:15pm. The 5 minute rule applies and those not attending are welcomed to send bids in via email to: burnleyknives@gmail.com.
• After the open bid, I'll be doing a Brawlers Only lottery for one (1) knife at 12:30. You will need your Brawler badge with you.

6pm - Show closes.


Sunday 6/2

8am - People wearing exhibitors badges admitted.

9am - Show opens to public.

• I'll be standing at my table without knives and a thousand yard stare....stop by and say Hi.

2pm - Show closes.

Monochrome Kwaiken Available.

Hey guys,
 I've got a Kwaiken ready to roll.
As always this will go to the first to respond with an "I'll take it" email to burnleyknives@gmail.com
 
This is a one of my Monochrome models with A hand rubbed cpm154 blade, wood grain Titanium scales, spun screws and scratch and polish details on the liners, clip and backspacer.

Thanks and good luck :)

Price $875.00 + shipping Sold 
( Some of you guys are getting really fast..)
Payment is due upon confirmation.

Maguru recurves available

Hey Guys,
 Show season is coming up fast and I decided to try and get out a small run of Maguru's before things get crazy.

I also finally had a chance to try a few new things that have been in the back of my mind for a while now.

The first is a new etched finish that I call "Solar" 
I really like the way it came out, super bold.

Next is the integration of my wood grain carving and patinated copper scales into one of my Japanese inspired knives.

As always these will go to the first people to reply with an I'll take it email to burnleyknives@gmail.com

Please refernce the number of the knife that you would like.

Thanks :)

Lucas

Basic specs
Steel-CPM154
Blade length- 2 3/4
Oal - 6.5
Thickness- 1/8
Grind- Hollow with swedge


Here we go.

.1
 Solar finish blade, wood grain copper scales under black wrap, mountain pattern kydex sheath with rip cord. 
Price- $350.00 + $10.00 shipping in conus Sold

.2
Viral finish blade, green rayskin under black wrap, wing pattern kydex sheath with rip cord. 
Price- $265.00 + $10.00 shipping in conus Sold

.3
Acid wash finish blade, "Bling" ray under black wrap Peekaboo skull patterned sheath with rip cord.
Price- $265.00 + $10.00 shipping in conus Sold

.4
Viral finish blade, wood grain copper scales under black wrap, dragonfly pattern sheath with rip cord.
Price- $350.00 +$10.00 shipping in conus Sold

.5
Solar finish blade, green rayskin under black wrap, Tsunami pattern sheath
with rip cord.
Price- $275.00 + $10.00 shipping in conus Sold